ZyXEL Communications XMG1930 Series User Manual page 266

Chapter 32 Link Layer Discovery Protocol (LLDP)
Figure 183 Advanced Application > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Dot1
and Dot3 TLV)
The following table describes the labels in the Dot1 and Dot3 parts of the screen.
Table 130 Advanced Application > LLDP > LLDP Remote Status > LLDP Remote Port Status Detail (Dot1
and Dot3 TLV)
LABEL DESCRIPTION
Dot1 TLV
Port VLAN ID This displays the VLAN ID of this port on the remote device.
TLV
Port-Protocol This displays the IEEE 802.1 Port Protocol VLAN ID TLV, which indicates whether the VLAN ID
VLAN ID TLV
and whether it is enabled and supported on the port of remote Switch which sent the
LLDPDU.
• Port-Protocol VLAN ID
• Port-Protocol VLAN ID Supported
• Port-Protocol VLAN ID Enabled
XMG1930 Series User's Guide
266