Set Up Login Accounts - ZyXEL Communications XMG1930 Series User Manual

Table 165 Management > Access Control > SNMP > User (continued)
LABEL
Delete
Cancel

38.4 Set Up Login Accounts

Up to five people (one administrator and four non-administrators) may access the Switch through Web
Configurator at any one time.
• An administrator is someone who can both view and configure Switch changes. The user name for
the Administrator is always admin. The default administrator password is 1234.
Note: It is highly recommended that you change the default administrator password (1234).
• A non-administrator (user name is something other than admin) is someone who can view and/or
configure Switch settings. The configuration right varies depending on the user's privilege level.
Click Management > Access Control > Logins to view the screen as shown.
Figure 227 Management > Access Control > Logins
Note: The input string in any field of this screen should not contain [ ? ], [ | ], [ ' ], [ " ] or [ , ].
In the Password fields, [ space ] is also not allowed.
The following table describes the labels in this screen.
Table 166 Management > Access Control > Logins
LABEL
Administrator
This is the default administrator account with the "admin" user name. You cannot change the default administrator
user name.
Old Password
New Password
Chapter 38 Access Control
DESCRIPTION
Click Delete to remove the selected entry from the summary table.
Click Cancel to begin configuring this screen afresh.
DESCRIPTION
Type the existing system password (1234 is the default password when shipped).
Enter your new system password.
XMG1930 Series User's Guide
321