Gui-Based Ftp Clients; Ftp Restrictions - ZyXEL Communications XMG1930 Series User Manual

37.8.4 GUI-based FTP Clients

The following table describes some of the commands that you may see in GUI-based FTP clients.
Table 159 General Commands for GUI-based FTP Clients
COMMAND
Host Address
Login Type
Transfer Type
Initial Remote Directory
Initial Local Directory

37.8.5 FTP Restrictions

FTP will not work when:
• FTP service is disabled in the Management > Access Control > Service Access Control screen.
• The IP addresses in the Management > Access Control > Remote Management screen does not
match the client IP address. If it does not match, the Switch will disconnect the FTP session
immediately.
Chapter 37 Maintenance
DESCRIPTION
Enter the address of the host server.
Anonymous.
This is when a user I.D. and password is automatically supplied to the server for
anonymous access. Anonymous logins will work only if your ISP or service administrator
has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer files in either single-byte printable characters (plain text format) or in binary
mode. Configuration and firmware files should be transferred in binary mode.
Specify the default remote directory (path).
Specify the default local directory (path).
XMG1930 Series User's Guide
314