Unit Clearances, Curb Dimensions, And Dimensional Data; Oad Units; Unit Clearances - Trane Horizon OADG Series Installation, Operation And Maintenance Manual

Unit Clearances, Curb Dimensions, and Dimensional
Data
WARNING
Combustible Materials!
Failure to maintain proper clearance between the unit
heat exchanger, vent surfaces and combustible
materials could cause a fire which could result in death
or serious injury or property damage. Refer to unit
nameplate and installation instructions for proper
clearances.
AVERTISSEMENT
Matériaux combustibles!
Tout manquement à l'obligation de maintenir une
distance appropriée entre l'échangeur de chaleur de
l'unité, les surfaces de ventilation et les matériaux
combustibles peut provoquer un incendie pouvant
résulter en des blessures corporelles graves, voire
mortelles, ou des dommages matériels. Reportez-vous
à la plaque signalétique de l'unité et aux instructions
d'installation pour connaître les distances appropriées.

OAD Units

Unit Clearances

Figure 1. Installation clearances for units with no
powered exhaust or ERV, in. (cm)
48.000
[121.9]
36.000
[91.4]
16
36.000
[91.4]
44.00
[111.3]
Figure 2. Installation clearances for unit with powered
exhaust but no ERV, in. (cm)
36.00
[91.4]
36.00
[91.4]
Note: 72 in. (182.9 cm) clearance is required above the
condenser fans.
Figure 3. Installation clearances for unit with ERV, in.
(cm)
48.000
[121.9]
36.000
[91.4]
Note: 72 in. (182.9 cm) clearance is required above the
condenser fans.
Figure 4. Unit to unit clearance, in. (cm)
84
(213.4)
36.00
[91.4]
48.00
[121.9]
36.000
[91.4]
60.000
[152.4]
84
(213.4)
OAU-SVX006E-EN