Table of Contents
Advertisement
To still be able to add "
together with one of the following placeholders:
"
"
"
"
Start of data
<DATAPOINTS_BEGIN>
Start of a text block that is repeated for sending data. "
before "
Separator
SEPARATOR=
The separator is only permitted after the "
The separator is followed by the escape sequence for the "New line" separator.
Example:
Syntax:
results in: String with inserted new line as separator between the values and after the last
sent value.
● 200
200
Function code (MindConnect IoT Extension)
● Station
<STATION_NAME>
Station name of the data point
Configuration only for publisher
● Data point / Tag
<DATAPOINT_NAME>
Name of the data point
● Group
<GROUP>
Group name
● Value
<DATAPOINT_VALUE>
Value of the data point
● Attribute
<ADDITIONAL_ATTRIBUTE>
Attribute (MindConnect IoT Extension)
SIMATIC CC7
Operating Instructions, 10/2019, C79000-G8976-C503-02
<
" for a line break
\n
" for "<"
\l
" for ">"
\g
" for "\"
\\
<DATAPOINTS_END>
<DATAPOINTS_BEGIN SEPARATOR=\n> ...
" and "
" to the user data, you can use the masking character "
>
" (end of the text block, see below).
<DATAPOINTS_BEGIN>
Configuration
4.9 Cloud configuration
" must be
<DATAPOINTS_BEGIN>
" component.
"
\
93
Advertisement
Table of Contents
