Siemens SIMATIC CloudConnect CC7 Series Operating Instructions Manual page 39

Mounting on pedestal
1. Insert the device with the bottom housing guide on the top edge of the pedestal
2. Press the device against the pedestal until the mounting rail release audibly locks in place
②
Uninstalling
Follow the steps below to remove the device from the rail:
1. Turn off the supply voltage of the device.
2. Pull the power supply plug and the cables of the communication networks.
3. Pull down the mounting rail release on the rear of the device.
4. Tilt the device out of the standard rail.
SIMATIC CC7
Operating Instructions, 10/2019, C79000-G8976-C503-02
.
Installation, wiring, commissioning
3.2 Installation
①
.
39