Table of Contents
Advertisement
Configuration
4.4 Calling the WBM
Figure 4-2
In the example, all topics containing the characters "To" are displayed.
Save
Confirm all your entries by clicking the "Save" button. Your settings are thus saved to the
buffer.
The saved configuration data is not applied by the device yet by saving. This prevents
inconsistent changes from being loaded to the Runtime system when the WBM page is
changed.
Application to the runtime system
All saved configuration data is applied to the Runtime system by clicking on the "Apply"
symbol.
Incorrect entries in the configuration
The input boxes of the WBM are checked during input for faulty content and consistency.
Notes are output for boxes with detected errors during saving. The settings can only be
saved after the error has been corrected.
Grayed out fields cannot be edited.
4.4
Calling the WBM
4.4.1
Establishing a connection to the WBM
Requirements
You can establish a connection between a PC and the gateway via HTTPS:
You can establish a connection over the P2 interface of the gateway.
The condition for access to the gateway is that the PC is located in the same subnet and that
the gateway can be reached.
52
Input box in which "To" was entered.
Operating Instructions, 10/2019, C79000-G8976-C503-02
SIMATIC CC7
Advertisement
Table of Contents
