Table of Contents
Advertisement
You can also allow an inserted CLP to be formatted by the gateway.
CLP
With this function, you can format a CLP that you wish to use for another gateway. The
formatting deletes the existing data on the CLP.
You need to perform the formatting on the device in which the CLP was used.
● CLP formatting
The inserted CLP is formatted after you click the "Format" button.
When the formatting process is complete, a message is displayed in the WBM. Do not switch
off the gateway before the message appears.
Only switch off the gateway after CLP formatting is complete. Then remove the CLP.
Configuration backup
Note
No saving of certificates
The following data is not saved when saving a configuration file:
• Certificates
• Private keys
• User data
● Configuration file
After a configuration file saved on the PC is selected with the "Browse" button, the file
name is displayed here.
● Browse
Searches the file system of the PC for a configuration file saved there that is intended to
be loaded on the gateway.
● Export configuration
Saves the configuration currently used by the gateway to a configuration file on the PC.
● Load on device
Downloads the configuration file shown under "File" to the gateway.
Note
The configuration data of the downloaded configuration file is only used by the gateway
after being applied to the runtime system ("Apply" button).
SIMATIC CC7
Operating Instructions, 10/2019, C79000-G8976-C503-02
Configuration
4.11 Maintenance
117
Advertisement
Table of Contents
