Siemens SIMATIC CloudConnect CC7 Series Operating Instructions Manual page 54

Configuration
4.4 Calling the WBM
Standard user data for the first login to the WBM is preassigned by the system:
User data
User name
Password
An administrator can be set up with all available rights for operation of the WBM.
Logging in
After establishing a connection between the PC and the device, the WBM opens with the
logon page.
Note
Entering the wrong user name or password
After entering an incorrect user name or incorrect password three times a lockout time of a
few minutes begins. Only after the lockout time has expired can you try to log in again.
● User name
Enter the user name here.
● Password
Enter the password here.
● Logging in
Click the button to set up the connection to the WBM.
When you log in for the first time, you are prompted to change the default user data. You can
find the rules for password assignment in the section User (Page 114).
Open Source Software and links to additional information
You can find the following links at the bottom of the login page:
● Online help
Opens the online help of the WBM.
● Open Source Software
Opens the license terms document for the Open Source Software.
If necessary, you can save the document on your PC.
● Siemens Industry Online Support
Opens the page of the gateway in the Internet portal of Siemens Industry Online Support.
54
Default values set in the factory
admin
admin
Operating Instructions, 10/2019, C79000-G8976-C503-02
SIMATIC CC7