Table of Contents
Advertisement
Diagnostics and maintenance
5.1
Diagnostics options
The following diagnostics options are available:
LEDs of the module
For information on the LED displays, refer to the section LEDs (Page 23).
Web Based Management (WBM)
To do this, you need to connect your PC to the gateway.
On the following WBM pages you obtain information on the status of the gateway:
● You will find general information on the status of the gateway on the start page of the
WBM, compare to section Info (Page 55).
● You will find the diagnostics messages on the diagnostics page of the WBM, refer to the
section Diagnostics (Page 119).
When important events occur, the gateway writes diagnostic messages to the diagnostics
buffer.
5.2
Loading new firmware
You can find the current firmware version of the device on the WBM page Info (Page 55).
New firmware versions
If a new firmware version is available for the module, you will find this on the Internet pages
of Siemens Industry Online Support:
Link: (https://support.industry.siemens.com/cs/ww/en/ps/25621/dl)
Save the firmware file on the configuration PC.
Downloading new firmware files
You load a new firmware file from the configuration PC on the gateway via the WBM.
You will find the description in the section Firmware (Page 115).
SIMATIC CC7
Operating Instructions, 10/2019, C79000-G8976-C503-02
5
121
Advertisement
Table of Contents
