The Analyzer And Accessories - Fluke OptiView III Series Getting Started Manual

The Analyzer and Accessories

The analyzer is designed for troubleshooting and monitoring Local Area Networks (LANs). It tests all seven
OSI layers from the cable to the application layer and everything in between, so problems have nowhere to
hide. The analyzer can be used in a stand-alone fashion or mounted in a rack using the optional rack mount
kit.
OptiView TM Series III Worgroup Analyzer supports 10/100/1000 Ethernet through the Network 10/100/
1000 port (RJ-45 jack) along with a 1000BASE-X fiber optic port that supports the following optional fiber
adapters: 1000BASE-SX (850nm), 1000BASE-LX (1300nm), 1000BASE-LX10 (1310nm), 1000BASE-BX (1490nm),
1000BASE-ZX (1550nm), and 100BASE-FX (1310nm). Check
fiber adapters.
OptiView
Workgroup
Analyzer
Power Cord
Figure 1. The OptiView
RS-232 Cable
Workgroup Analyzer and Supplied Accessories
TM
The Analyzer and Accessories
www.flukenetworks.com
Getting
Started
Guide
Workgroup Analyzer
for additional supported
CD
Startup
OptiView Series
TM
Workgroup Analyzer
Startup Card
ahq01f.eps
3