Table of Contents
Advertisement
MS-9245 1U Rackmount Server
Fan Power Connectors: SFAN1/SFAN2/SFAN3/SFAN4/SFAN5
The SFAN1/SFAN2/SFAN3/SFAN4/SFAN5 (system fans) support system cool-
ing fan with +12V. It supports three-pin head connector. When connecting the wire
to the connectors, always take note that the red wire is the positive and should be
connected to the +12V, the black wire is Ground and should be connected to GND. If
the mainboard has a System Hardware Monitor chipset on-board, you must use a
specially designed fan with speed sensor to take advantage of the CPU fan control.
NOTE
1. Always consult the vendors for proper CPU cooling fan.
2. SFAN supports the fan control. MS-9245 will automatically control
the CPU fan speed according to the system temperature.
2-10
+12V
GND
Sensor
SFAN1
Sensor
+12V
GND
SFAN5
+12V
Sensor
GND
SFAN2
Sensor
+12V
GND
SFAN3
Sensor
+12V
GND
SFAN4
Advertisement
Table of Contents
