MSI K1-1000D User Manual page 48

MS-9245 1U Rackmount Server
Com Port Address
This feature allows you to enable/disable the Com port on the motherboard.
Options: [Disabled], [On-board COM A].
Console connection
This feature indicates whether the console is connected directly to the system
or a modem is used for connection. Options: [Direct], [Via modem].
Baud Rate
It allows you to select delay befor key repeat. Options: [300], [1200], [2400],
[9600], [19.2K], [38.4K], [57.6K], [115.2K].
FIFO Level
This feature allows you to enable the specified FIFO level. Options: [Level 4],
[Level 14].
Flow Control
This feature allows you to enable flow control. Options: [None], [XON/XOFF],
[CTS/RTS].
Console Type
This feature allows you to enable the specified console type. Options: [vt100],
[vt100 8bit], [ANSI 7bit], [ANSI], [ut100 plus], [UTF8].
Continue C. R. after POST
Selecting [On] will enable Console Redirection after OS has loaded. Options:
[On], [Off].
POST Error Log
Press PgUp/<+> or PgDn/<-> to POST Error Log. The following submenu will appear.
View DMI event log View DMI event log
View DMI event log
View DMI event log View DMI event log
Clear all DMI event logs Clear all DMI event logs
Clear all DMI event logs
Clear all DMI event logs Clear all DMI event logs
Event Logging Event Logging
Event Logging
Event Logging Event Logging
F1 Help
Esc Exit
3-14
PhoenixBIOS Setup Utility
Advanced Advanced
Advanced
Advanced Advanced
POST Error Log POST Error Log
POST Error Log
POST Error Log POST Error Log
[Enter] [Enter]
[Enter]
[Enter] [Enter]
[No] [No]
[No]
[No] [No]
[Enabled] [Enabled]
[Enabled]
[Enabled] [Enabled]
Select Item
Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help Item Specific Help
Item Specific Help
Item Specific Help Item Specific Help
View the contents of the View the contents of the
View the contents of the
View the contents of the View the contents of the
DMI event log. DMI event log.
DMI event log.
DMI event log. DMI event log.
-/+ Change Values F9 Setup Defaults
8