MSI K1-1000D User Manual page 10

MS-9245 1U Rackmount Server
MS-9549 BMC Card Specification
BMC Chip :
- Qlogic Zircon UL ( ARM7 TDMI 40M RISC) , 128pin PQFP
- Host hardware interface : LPC interface
- Host software interface : KCS interface
Memory Size
- 256 X 16 Bits SRAM
- 4M Bits Flash
Form Factor:
- Add-on Card on SO-DIMM (144 pin , Key position in 50)
On-board I2Cmux
- 9545
On board Connector/Header:
- JTAG header (14 pin) for debugging
Key Features:
- IPMI 1.5 Compliant
- Out-of-band LAN based management using RMCP
- FRU/SEL access
- Remote out-of-band alerts
- Event log
- Support for CLI (command line interface) over Serial or shared NIC (RMCP)
- Ability to update firmware inband unattended
- Remote access security (MD5)
- Out-of-band environmental monitoring and alerting
- Secure remote power control and system reset over Serial or shared NIC
(RMCP)
- Support Microsoft EMS
- Support on-board I2C ADM 1027 to extend Hardware monitor feature
System Management:
Two SMBus 2.0 (I2C)
One SMBus for Broadcom 5704C
One SMBus for ADM 1027 , SEEPROM access , CPU thermal sensor
CPU Fan speed control dependent on System Temperature
System Fan speed control dependent on System Temperature
Sensor Management
Monitored Voltage: +12V, +5V, +3.3V, Vcore, 5V standby, +2.5V
Thermal protection (CPU/System overheat shut down through BMC)
No Chassis Intrusion
LED x 6 ( Power , DASD , Fault , ID_LED , BMC Heartbeat )
On-Board Diagnostic LEDs ( 8 x Memory DIMM, 2 x CPU, 5 x FAN )
Support shared NIC (Broadcom 5704C)
1-4