MSI K1-1000D User Manual page 45

NumLock
[On] or [Off] turns NumLock on or off at boot up. [Auto] turns NumLock on if it
finds a numeric key pad. Options: [On], [Off], [Auto].
Keyboard auto-repeat rate
It sets the number of times a second to repeat a keystroke when you hold the
key down. Options: [30/sec], [26.7/sec], [21.8/sec], [18.5/sec], [13.3/sec], [10/
sec], [6/sec], [2/sec].
Keyboard auto-repeat delay
It sets the delay time after the key is held down before it begins to repeat the
keystroke. Options: [1/4 sec], [1/2 sec], [3/4 sec], [1 sec].
I/O Device Configuration
The sub-menu is used to configure I/O Devices for optimal system performance.
Advanced Advanced
Advanced
Advanced Advanced
I/O Device Configuration I/O Device Configuration
I/O Device Configuration
I/O Device Configuration I/O Device Configuration
S e r i a l p o r t A : S e r i a l p o r t A :
S e r i a l p o r t A :
S e r i a l p o r t A : S e r i a l p o r t A :
Base I/O address : Base I/O address :
Base I/O address :
Base I/O address : Base I/O address :
I n t e r r u p t : I n t e r r u p t :
I n t e r r u p t :
I n t e r r u p t : I n t e r r u p t :
S e r i a l p o r t B : S e r i a l p o r t B :
S e r i a l p o r t B :
S e r i a l p o r t B : S e r i a l p o r t B :
Base I/O address : Base I/O address :
Base I/O address :
Base I/O address : Base I/O address :
I n t e r r u p t : I n t e r r u p t :
I n t e r r u p t :
I n t e r r u p t : I n t e r r u p t :
F1 Help
Esc Exit
Serial port A/B
Setting to [Enabled] allows users to configure the base I/O address and IRQ of
Port A/Port B manually. Selecting [Auto] allows BIOS to automatically determine
the correct base I/O port address. Options: [Enabled], [Disabled], [Auto].
Base I/O address
It specifies the base I/O address for Port A/Port B. Options: [3F8], [2F8],
[3E8], [2E8].
PhoenixBIOS Setup Utility
[Enabled] [Enabled]
[Enabled]
[Enabled] [Enabled]
[3F8] [3F8]
[3F8]
[3F8] [3F8]
[IRQ 4] [IRQ 4]
[IRQ 4]
[IRQ 4] [IRQ 4]
[Enabled] [Enabled]
[Enabled]
[Enabled] [Enabled]
[2F8] [2F8]
[2F8]
[2F8] [2F8]
[IRQ 3] [IRQ 3]
[IRQ 3]
[IRQ 3] [IRQ 3]
Select Item -/+ Change Values F9 Setup Defaults
Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help Item Specific Help
Item Specific Help
Item Specific Help Item Specific Help
Configure serial port A Configure serial port A
Configure serial port A
Configure serial port A Configure serial port A
using options: using options:
using options:
using options: using options:
[Disabled] [Disabled]
[Disabled]
[Disabled] [Disabled]
No configuration No configuration
No configuration
No configuration No configuration
[Enabled] [Enabled]
[Enabled]
[Enabled] [Enabled]
User configuration User configuration
User configuration
User configuration User configuration
[Auto] [Auto]
[Auto]
[Auto] [Auto]
BIOS or OS chooses BIOS or OS chooses
BIOS or OS chooses
BIOS or OS chooses BIOS or OS chooses
c o n f i g u r a t i o n c o n f i g u r a t i o n
c o n f i g u r a t i o n
c o n f i g u r a t i o n c o n f i g u r a t i o n
(OS Controlled) (OS Controlled)
(OS Controlled)
(OS Controlled) (OS Controlled)
Displayed when Displayed when
Displayed when
Displayed when Displayed when
controlled by OS controlled by OS
controlled by OS
controlled by OS controlled by OS
8
BIOS Setup
3-11