Table of Contents
Advertisement
MS-9266 1U Rackmount Server
Fan Power Connectors: SFAN1/SFAN2/SFAN3/SFAN4/SFAN5
The SFAN1/SFAN2/SFAN3/SFAN4/SFAN5 (system fans) support system cool-
ing fan with +12V. It supports three-pin head connector. W hen connecting the wire
to the connectors, always take note that the red wire is the positive and should be
connected to the +12V, the black wire is Ground and should be connected to GND. If
the mainboard has a System Hardware Monitor chipset on-board, you must use a
specially designed fan with speed sensor to take advantage of the CPU fan control.
GND
MSI Reminds You...
1. Always consult the vendors for proper CPU cooling fan.
2. SFAN supports the fan control. MS-9266 will automatically control
the CPU fan speed according to the system temperature.
Rear Status LED: J20
The LED shows the error and power status.
3-12
+12V
Sensor
Sensor
SFAN1
Sensor
+12V
GND
SFAN4
+12V
Sensor
GND
+12V
GND
SFAN2
Sensor
+12V
GND
SFAN5
Error LED (Yellow)
Power LED (Green)
SFAN3
Advertisement
Table of Contents
