Pci / Plug And Play Setup Page - ECS P6S5AT User Manual

KeyBoard Power
If you enable this item, you can turn the system on
On Function and off by pressing hot keys on the keyboard. You
must enable the Keyboard Power On jumper and
use an ATX power supply in order to use this
feature.

PCI / Plug and Play Setup Page

This page sets some of the parameters for devices installed on the
PCI bus and devices that use the system plug and play capability.
Plug and Play Aware O/S
Primary Graphics Adapter
Allocate IRQ to PCI VGA
Plug and Play
Enable this item if you are using an O/S that
Aware O/S supports Plug and Play such as Windows
95/98/ME.
Primary Graphics
This item indicates if the primary graphics adapter
Adapter uses the PCI or the AGP bus. The default PCI
setting still lets the onboard display work and
allows the use of a second display card installed in
a PCI slot.
Allocate IRQ to
If this item is enabled, an IRQ will be assigned to
PCI VGA the PCI VGA graphics system. You set this value
to No to free up an IRQ.
3: BIOS Setup Utility
Yes
PCI
Yes
ESC : Quit
F1 : Help
F5 : Old Values (Shift)F2
F6 : Load Optimal values
F7 : Load Best performance values
↑↓←→ : Select Item
PU/PD/+/- : Modify
: Color
25