Pci/ Plug And Play Setup Page - ECS P4S5A2 User Manual

PCI / Plug and Play Setup Page
This page sets some of the parameters for devices installed
on the PCI bus and devices that use the system plug and play
capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S
Primary Graphics Adapter
Allocate IRQ for PCI VGA
Plug and Play Aware O/S
Enable this item if you are using an O/S that supports Plug
and Play such as Windows 95 or 98.
Primary Graphics Adapter
This item indicates if the primary graphics adapter uses the
PCI or the AGP bus. The default AGP setting still lets the on-
board display w ork and allows the use of a second display
card installed in an AGP slot.
Allocate IRQ for PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA
graphics system. You set this value to No to free up an IRQ.
Yes
AGP
Yes
ESC : Quit
F1 : Help
F5 : Old Values (Shift)F2
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
41
↑ ↓ ←→ : Select Item
PU/PD/+/ - : Modify
: Color