Table of Contents
Advertisement
Mainboard User's Manual
PCI / Plug and Play Setup Page
This page sets some of the parameters for devices installed on the
PCI bus and devices that use the system plug and play capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S
Primary Graphics Adapter
Allocate IRQ to PCI VGA
PCI IDE BusMaster
Plug and Play
Enable this item if you are using an O/S that
supports Plug and Play such as Windows
Aware O/S
95/98/ME.
Primary Graphics
This item indicates if the primary graphics adapter
uses the PCI or the AGP bus. The default PCI
Adapter
setting still lets the onboard display work and
allows the use of a second display card installed in
a PCI slot.
Allocate IRQ to
If this item is enabled, an IRQ will be assigned to
the PCI VGA graphics system. You set this value
PCI VGA
to No to free up an IRQ.
PCI IDE
This item enables or disables the DMA under
DOS mode. We recommend you to leave this item
BusMaster
at the default value.
Load Optimal Settings
If you select this item and press Enter a dialog box appears. If you
press Y, and then Enter, the Setup Utility loads a set of fail-safe
default values. These default values are not very demanding and
they should allow your system to function with most kinds of
hardware and memory chips.
Note: It is highly recommended that users enter this option to
load optimal values for accessing the best performance.
30
Yes
PCI
Yes
Disabled
ESC : Quit
F1
: Help
F5
: Old Values (Shift)F2 : Color
F6
: Load BIOS Defaults
F7
: Load Setup Defaults
↑↓←→ : Select Item
PU/PD/+/- : Modify
Advertisement
Table of Contents
