Standard Cmos Setup Page - ECS P6S5AT User Manual

Standard CMOS Setup Page

Use this page to set basic information such as the date, the time,
the IDE devices, and the diskette drives. If you press the F3 key,
the system will automatically detect and configure the hard disks
on the IDE channels.
Date (mm/dd/yy) : Tue Apr 10, 2001
Time (hh/mm/ss) : 14:26:53
Type
Pri Master : Auto
Pri Slave : Auto
Sec Master : Auto
Sec Slave : Auto
Floppy Drive A : 1.44MB 3 1/2"
Floppy Drive B : Not Installed
Month : Jan – Dec
Day : 01 – 31
Year : 1901 – 2099
Date & Time
Use these items to set the system date and time
Pri Master
Use these items to configure devices connected to
Pri Slave
the Primary and Secondary IDE channels. To
configure an IDE hard disk drive, choose Auto . If the
Sec Master
Auto setting fails to find a hard disk drive, set it to
Sec Slave
User, and then fill in the hard disk characteristics
(Size, Cyls, etc.) manually. If you have a CD-ROM
drive, select the setting CDROM. If you have an
ATAPI device with removable media (e.g. a ZIP
drive or an LS-120) select Floptical.
Floppy Drive A
Use these items to set the size and capacity of the
Floppy Drive B
floppy diskette drive(s) installed in the system.
Size Cyln Head WPcom Sec Mode Mode Mode Mode
3: BIOS Setup Utility
LBA Blk PIO 32Bit
On
On
On
On
ESC : Exit
↑ ↓ : Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color
F3 : Detect All HDD
21