Running The Setup Utility - ECS P6S5AT User Manual

Mainboard User's Manual

Running the Setup Utility

Each time your computer starts, before the operating system loads,
a message appears on the screen that prompts you to "Hit <DEL>
if you want to run SETUP". When you see this message, press the
Delete key and the Main menu page of the Setup Utility appears on
your monitor.
Standard CMOS Setup
Advanced Setup
Power Management Setup
PCI / Plug and Play Setup
Load Optimal Settings
Load Best Performance Settings
↑↓←→ : Select Item
ESC: Quit
F6: Optimal values
You can use the cursor arrow keys to highlight any of the options
on the main menu page. Press Enter to select the highlighted
option. To leave the setup utility, press the Escape key. To cycle
through the Setup Utility's optional color schemes hold down the
Shift key and press F2.
Some of the options on the main menu page lead to tables of items
with installed values. In these pages, use the cursor arrow keys to
highlight the items, and then use the PgUp and PgDn keys to cycle
through the alternate values for each of the items. Other options on
the main menu page lead to dialog boxes which require you to
answer Yes or No by hitting the Y or N keys.
If you have already made changes to the setup utility, press F10 to
save those changes and exit the utility. Press F5 to reset the
changes to the original values. Press F6 to install the setup utility
with a set of default values. Press F7 to install the setup utility with
a set of high-performance values.
20
Features Setup
CPU PnP Setup
Hardware Monitor
Change Password
Exit
(Shift)F2 : Change Color
F7: Best performance values
F5 : Old Values
F10: Save&Exit