Pci / Plug And Play Setup Page - ECS K7AMA User Manual

HotKey Select
If the item KeyBoard PowerOn is enabled, you can
use this item to select the hot keys to power on
the system.

PCI / Plug and Play Setup Page

This page sets some of the parameters for devices installed on the
PCI bus and devices that use the system plug and play capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S
Primary Graphics Adapter
PCI VGA Palette Snoop
Allocate IRQ for PCI VGA
Plug and Play
Enable this item if you are using an O/S that
supports Plug and Play such as Windows 95 or
Aware O/S
98.
Primary Graphics
This item indicates if the primary graphics adapter
Adapter
uses the PCI or the AGP bus. The default PCI
setting still lets the onboard display work and
allows the use of a second display card installed in
a PCI slot.
PCI VGA Palette
When this item is enabled, multiple VGA devices
operating on different buses can handle data from
Snoop
the CPU on each set of palette registers on every
video device.
Allocate IRQ for
If this item is enabled, an IRQ will be assigned to
PCI VGA the PCI VGA graphics system. You set this value
to No to free up an IRQ.
Yes
PCI
Disabled
Yes
ESC : Quit
F1 : Help
F5 : Old Values (Shift)F2
F6 : Load Optimal values
F7 : Load Best performance values
26
↑↓←→ : Select Item
PU/PD/+/ - : Modify
: Color