Pci / Plug And Play Setup Page - ECS P4VXASD Manual

PCI / Plug and Play Setup Page

This page sets some of the parameters for devices installed
on the PCI bus and devices that use the system plug and play
capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S
PCI Latency Timer
Primary Graphics Adapter
Allocate IRQ for PCI VGA
Plug and Play Aware O/S
Enable this item if you are using an O/S that supports Plug
and Play such as Windows 95 or 98.
PCI Latency Timer
This item sets the latency timer for the PCI bus. Leave this
item at the default value.
Primary Graphics Adapter
This item indicates if the primary graphics adapter uses the
PCI or the AGP bus. The default AGP setting still lets the on-
board display work and allows the use of a second display
card installed in an AGP slot.
Allocate IRQ for PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA
graphics system. You set this value to No to free up an IRQ.
Yes
32
AGP
Yes
↑↓←→ : Select Item
ESC : Quit
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
44