Dynaudio Studio Series User Manual page 20

S4-DVC65
Normal Mode
The dipole switch on the rear of the S4-DVC65 model should be set to Normal.
Mono mode
Mono mode is appropriate if the S4-DVC65 is to be connected to a single amplifier channel for multi-channel
surround applications. Connect the positive conductor to the left hand red terminal and the negative conductor to
the right hand black terminal. Use a short length of cable to connect the remaining two terminals together.
The dipole switch on the rear of the S4-DVC65 model will change the phase of the left tweeter from 0 degree in
normal to 180 degrees in Dipole. Set the switch to Normal or Dipole as appropriate.
20 Studio Series User manual