Navigate To A Point Of Interest - Lowrance GlobalMap 3600C iGPS Operation Instructions Manual

Navigate to cursor. In this example, the cursor has selected
3. Press |
MENU
The Map Page will display a dotted line from your current position to the
cursor position. The Navigation Page displays a compass rose showing
navigation information to your destination. See the following examples.
The 15-mile zoom figure at left clearly shows the dotted course line
connecting your current position to your destination. The 40-mile
zoom, center, shows both current position and destination on screen.
The Navigation Page, right, will also show navigation information.
To stop navigating to the cursor, use the Cancel Navigation command:
press |
MENU MENU
stops showing navigation information.

Navigate to a Point of Interest

For POIs that are in view on the map, you can easily use the Navigate
to Cursor command above; just use the cursor to select the POI.
the town of Oologah, Oklahoma.
and the unit will begin navigating to the cursor location.
ENT
|↓ to
C
ANCEL
|
N ENT
AVIGATION
45
|← to |
Y ENT
ES
. The unit