Table of Contents
Advertisement
B. To find the waypoint, press ↓ to
appears with the cursor highlighting the found waypoint.
Waypoint Information screens with the Go Waypoint command se-
lected, left, and the Find on Map command selected, right.
To clear these menus and return to the previous page, press
5. If you're looking by name, there are two options: A. You can spell
out the name in the top selection box. Press ↑ or ↓ to change the first
letter, then press → to move the cursor to the next letter and repeat
until the name is correct, then press
down to the lower selection list by pressing
select a waypoint from the list, then press
tion screen appears.
Find By Name menu, left. Waypoint Information screen, center. At right,
the found waypoint is highlighted by the cursor on the Map Page.
A. To navigate to the waypoint, press
already highlighted.) The unit will show navigation information to the
waypoint.
B. To find the waypoint, press ↓ to
appears with the cursor highlighting the found waypoint.
F
O
M
IND
N
|
ENT
ENT
ENT
. The waypoint informa-
ENT
. (Go Waypoint command is
ENT
F
O
M
IND
N
116
|
. The Map Page
ENT
AP
repeatedly.
EXIT
. B. Or you can jump
, then press ↓ or ↑ to
|
. The Map Page
ENT
AP
Advertisement
Table of Contents
