Lowrance GlobalMap 3600C iGPS Operation Instructions Manual page 111

Mapping gps receiver
Hide thumbs Also See for GlobalMap 3600C iGPS:
Table of Contents

Advertisement

press → to move the cursor to the next letter and repeat until the name
is correct, then press
by pressing
ENT
then press
ENT
NOTE:
We recommend that you do not enter a city name unless the list you
are given is too large when searching without it. This unit can ac-
tually search quicker without a city and you save time by not en-
tering a city name.
Find City field, left, Search in particular city only option, center;
6. When the necessary search fields are filled in, press ↓ to
|
. You unit asks you to wait while it searches for the address.
ENT
DRESS
(If an address is not in the database, a message appears saying the ad-
dress could not be found.)
7. The unit will display a list of addresses. If the address you are look-
ing for is highlighted at the top of the list, press
to select the correct address from the list, then press
Page will then appear with the location selected by the cursor. (In the
example below, we are looking for 12303 East 11th Street in Tulsa, not
11th Court, so we had to scroll down the list to select the right one.)
Address search result list, left. At center, Map Page showing location
of the address on the map, highlighted by cursor. At right, after the
address is located, you can navigate to it ("D" symbol for destination).
|
ENT
ENT
, then press ↓ or ↑ to select a city name from the list,
. The city name you selected is now in the city field.
Find City by name, right.
. B. Jump down to the lower selection list
105
. If not, use ↓ and ↑
ENT
. The Map
ENT
F
A
IND
D-

Advertisement

Table of Contents
loading

Table of Contents