Table of Contents
Advertisement
Timers command: controls the up timer, down timer and alarm clock
settings.
Browse MMC Files command: this allows you to view the installed
MMC card and the files it contains.
Pages
The unit has three Pages that represent the three major operating modes.
They are the Satellite Status Page, the Navigation Page and the Map
Page. They are accessed by pressing the
select a Page. (Clear the Pages Menu by pressing
Pages Menu, showing some Map display options.
Satellite Status Page
The Satellite Status Page, shown, provides detailed information on the
status of the unit's satellite lock-on and position acquisition. To get to
the Satellite Status Page: Press the
select
. (Clear the Pages Menu by pressing
S
TATUS
No matter what Page you are on, a flashing current position indica-
tor/question mark symbol and flashing GPS data displays indicate that
satellite lock has been lost and there is no position confirmed. The Sat-
ellite Status Page shows you the quality and accuracy of the current
satellite lock-on and position calculation.
WARNING:
Do not begin navigating with this unit until the numbers
have stopped flashing!
key, then using → or ← to
PAGES
EXIT
key, then use → or ← to
PAGES
26
.)
.)
EXIT
Advertisement
Table of Contents
