Table of Contents
Advertisement
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must first insert a
card into the unit in order to activate the Load or Save commands.
To transfer data from the unit to the MMC: press
To transfer data from the MMC to the unit: press → to
3. Saving to MMC: To accept the default name "Data" for the GPS
Data File, press ↓ to
shown in the following figures), press
Press ↑ or ↓ to change the first character, then press → to the next
character and repeat until the name is correct. Then, press
|
S
D
ENT
AVE
ATA
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, repeatedly
press
.
EXIT
From left to right, these figures show the menu sequence for naming
and saving a GPS Data File from the unit's memory to an MMC.
4. Loading to unit memory: There may be more than one GPS Data
File (*.USR) on the card. To select a file, press
tion box, use ↓ or ↑ to highlight the file, then press
selection. Next, press ↓ to
pletion message when the data transfer is finished. To return to the
Page view, press
S
D
AVE
.
L
|
|
EXIT
EXIT
|
. If you wish to rename the file (as
ENT
ATA
ENT
|
D
ENT
OAD
ATA
|
.
EXIT
EXIT
53
ENT
to activate the selection box.
to activate the selec-
ENT
ENT
. The unit will display a com-
(for
.)
S
AVE
|
.
L
ENT
OAD
|↓ to
ENT
to accept the
Advertisement
Table of Contents
