Applying Power - KTI Networks KTGC-221 Installation Manual

The following figure illustrates the converter is installed with Din-Rail mounting bracket:

2.4 Applying Power

Device DC Input Jack
Interface:
Operating input voltages: +12 ~ +48VDC
Power consumption:
Polarity reversal:
Bundled AC Power Adapter
Before you begin the installation, check the AC voltage of your area. The power adapter which is used to
supply the DC power for the device should have the AC voltage matching the commercial power voltage in
your area.
Specifications
Rated input voltage:
Rated input frequency:
Rated output voltage:
Line regulation:
Rated power:
Output current:
Steps to apply the power to the device are:
1. Connect power adapter DC plug to the DC input jack located on the back of the unit before connecting to
the AC outlet.
2. Connect the power adapter to the AC outlet.
3. Check Power LED indication.
DC Jack ( -D 6.3mm / + D 2.0mm)
9W max.
Shutdown protection
100~240 VAC
50/60Hz
12VDC (5%)
2%
12W
1A max.
-12-