Applying Power - KTI Networks KGC-301 Installation Manual

2.4 Applying Power

Before you begin the installation, check the AC voltage of your area. The AC power adapter which is
used to supply the DC power for the unit should have the AC voltage matching the commercial power
voltage in your area.
Steps to apply the power to the device are:
1. Connect power adapter DC plug to the DC input jack located on the back of the device before
connecting to the AC outlet.
2. Connect the power adapter to the AC outlet.
3. Check Power LED indication.
Note: Before you begin the installation, check the AC voltage of your area. The AC power
adapter which is used to supply the DC power for the device should have the AC voltage
matching the commercial power voltage in your area.
12