Introduction; Features - KTI Networks KTGC-221 Installation Manual

1. Introduction

The device is a web smart 10Gigabit Ethernet media converter series which provide the following features:
Data Conversion between different media types and speed rates
The media converter supports the following conversions:

10Gbps (10GBASE-T) copper to/from 10Gbps (10GBASE-R) fiber

5Gbps (5GBASE-T) copper to/from 5Gbps (5GBASE-R) fiber

2.5Gbps (2.5GBASE-T) copper to/from 2.5Gbps (2500BASE-X) fiber

1Gbps (1000BASE-T) copper to/from 1Gbps (1000BASE-X) fiber
Multi-rate Fiber Connectivity
The converter is featured with one SFP+ slot that can be installed with variety of optional transceivers
supporting multiple data rates, 10G/5G/2.5G/1G over multimode or single mode fiber for short reach up to long
reach distance.

1.1 Features


The device supports the following multi-rate and media conversion:
- 10GBASE-T to 10GBASE-R conversion
- 5GBASE-T to 5GBASE-R conversion
- 2.5GBASE-T to 2500BASE-X conversion
- 1000BASE-T copper to 1000BASE-X fiber conversion

Full wire speed conversion and no packet length limitation

Jumbo frame support

Protocol transparent conversion

The copper port supports auto-negotiation and provides auto-MDI/MDI-X function and polarity reverse
correction function.

Web-based management for configuration, port status and port test
-6-