Table of Contents
Advertisement
2.4 Applying Power
The product provide two types of power interfaces, terminal block and DC
power jack for receiving DC power input from external power supply.
DC Power Input Specification
Operating Voltage
Power Consumption
DC Power Terminal Block
Connectors
Pin Assignments
Power wires
The steps to install power wires to the terminal block are:
1. Loose the terminal screw to open the contact for power wire
insertion. Insert power wire into the contact.
2. Screw the terminal and make sure power wire is fixed securely.
+7 ~ +30VDC
Max. 3.0W @30VDC
Screw-type Terminal block (2 sets)
DC1 + -
Positive (+) Negative (-) terminals
DC2 + -
2nd Positive (+) Negative (-) terminals
24 ~ 12AWG (IEC 0.5~2.5mm
-21-
2
)
Advertisement
Table of Contents
