Installation; Unpacking; Mounting The Device; Applying Power - KTI Networks KC-300DM Series Installation Manual

2. Installation

2.1 Unpacking

Check that the following components have been included:
 Installation guide (or contained in the product CD)
 10/100 Media Converter
 One AC power adapter
If any item is found missing or damaged, please contact your local reseller for replacement.

2.2 Mounting the Device

Desktop Mounting
The media converter can be mounted on a desktop or shelf. Make sure that there is proper heat dissipation from
and adequate ventilation around the device. Do not place heavy objects on the device.
Wall Mounting
The media converter also can be mounted on a wall. On bottom of the device, wall mounting hole is provided
for wall mounting.
Installation into Center Chassis KC-1300
The media converter also can be installed in KC-1300 center chassis. The center chassis provides the power
supply to the converter. Up to 16 units can be installed in one chassis. Unscrew and remove the cover of the
center connector before inserting the converter into the chassis. Refer to the operation manual of center chassis
KC-1300 for more information.

2.3 Applying Power

Before you begin the installation, check the AC voltage of your area. The AC power adapter which is used to
supply the DC power for the unit should have the AC voltage matching the commercial power voltage in your
area.
The AC Power Adapter Specifications
AC input power:
AC power voltage of your area, options –
Rated AC 100-240V/50-60Hz DC7.5V0.5Amin.
-13-