Setting The Sw Out Terminal Output; Rs-232C Setting; Setting The Buzzer - Lorex SG7970 User Manual

Setting the SW Out Terminal Output

Synchronization pulses for multiplexer can be obtained
from the SW OUT terminal.
1 Press the MENU button, to display the initial MENU.
2 Press the SHIFT
(
3 Press the SHIFT
TERMINAL SET menu.
• If "TIMING" is set to
FRAME (see step 6),
"FRAME" will be indicated
instead of "FIELD".
• In case of TimeLapse
mode, refer to the
"Recording Speed" Table
4 Press the SHIFT
of page 14.
"FRAME").
• With each press of the SHIFT
change as indicated below.
5 Press the SHIFT
6 Press the SHIFT
• AUTO . . . When you connect with external equipment,
• FIELD . . . 1 pulse is output after each set number of
• FRAME . . 1 pulse is output after each set number frames.
7 Press the MENU button, the normal screen is
displayed.
• The setting procedure is now complete.
34
button to move the arrow mark
) to SW OUT Terminal Set.
button to display the SW OUT
button to set "FIELD" (or
button, the setting will
button, to select Timing.
button to set the "TIMING".
the field will be switched automatically.
fields. (VHS mode, 2H, 6H)
(VHS mode, 2H, 6H)
Time Lapse Video Cassette Recorder

RS-232C Setting

You can control this set in remote by communication
• For RS-232C connection
with Computer.
with computer and its
operation, refer to the
• Communication speed : 19200bps
additional RS-232C serial
communication manual.
4800bps

Setting the Buzzer

1 Press the MENU button to display the initial MENU.
In the following cases, the
buzzer will be heard
2 Press the SHIFT
approximately 5 times.
The VCR MODE SET menu is displayed.
- If the REC button is pressed
while a cassette without
erasure-prevention tab is
loaded.
- If a cassette, without the
erasure - prevention tab, is
loaded while the timer is
set.
3 Press the SHIFT
- If there is a series recording
input while a cassette
(
without erasure-prevention
tab is loaded.
4 Press the SHIFT
functions described below.
- If the TIMER button is
pressed without inserting a
• The buzzer will be heard whenever a button is pressed.
cassette.
• If "NO" is set, the buzzer
will not operate.
Time Lapse Video Cassette Recorder
9600bps
button to select VCR Mode Set.
button to move the arrow mark
) to Buzzer Set.
button to set "YES" for the
35