Alarm Recording - Lorex SG7970 User Manual

Alarm Recording

Alarm Recording Setting
Alarm recording is performed when there is an input
(trigger) at the ALARM IN terminal, "
on the display panel.
1 Make all necessary connections.
2 Press the MENU, SHIFT
sequence to display the REC MODE SET menu .
3 Press the SHIFT
points to ALARM REC SET.
4 Press the SHIFT
SET menu.
• During alarm recording all
buttons are disabled
except the STOP button. If
5 Press the SHIFT
the STOP button is
pressed, the alarm
• YES . . . .The alarm recording takes place when there is
recording will stop.
• If an alarm trigger is
• NO . . . . The alarm recording does not take place
received while alarm
6 Press the SHIFT
recording is in progress,
the recording duration for
7 Press the SHIFT
the second alarm will be
calculated from that point. recording speed.
• When there is a power
• 2H . . . 2-hour mode recording
loss during alarm
• 6H . . . 6-hour mode recording
recording, if the power is
restored within the
• 18H . . 18-hour mode recording
recording set duration,
• 30H . . 30-hour mode recording
alarm recording will
continue.
8 Press the SHIFT
• When you select 'Alarm
9 Press the SHIFT
Duration' as 20sec,
recording duration.
30sec, 40sec or 1min,
alarm search error may
• Auto : Records as long as the alarm signal is being
happen. Therefore confirm
it in 'Alarm TIme' menu
and scan it.
20
" is displayed
, SHIFT buttons in
button until the arrow mark (
button to display the ALARM REC
button to select "YES" or "NO".
alarm trigger input
button to set the Alarm speed.
button to select the desired
button to set the alarm duration.
button to select the desired
input. (Minimum 2 minutes is recorded.)
Time Lapse Video Cassette Recorder
• Alarm Counter Reset can
be performed by pressing
the CLEAR key in "Alarm
)
Time" of Initial Menu
screen.
Time Lapse Video Cassette Recorder
• Auto / 20sec / 30sec / 40sec / 01min / 02min / 3min /
5min / 10min / 15min / 20min / 25min / 30min :
Recording for the set duration. (min : minute)
• T.END : Records until the tape end is reached when
there is alarm trigger input.
Alarm Recording Counter Display
During alarm recording, " " will be flashing on the
display panel.
The maximum display number of alarm triggers is "35",
at the next alarm recording the counter will indicate
"00".
Connecting to a Monitor for Normal Recording
21