Normal Recording - Lorex SG7970 User Manual

Normal Recording

Normal Recording
1 Turn the power on to all devices used.
• If the Repeat Rec Set is set
to "NO" in the REC
2 Load a cassette tape with erasure prevention tab in
MODE SET menu ,
place.
recording will continue to
the end of the tape, then
3 Press the REC/PLAY SPEED
stop and the tape will be
ejected.
the recording speed.
• The recording speed is displayed on-screen and on the
display panel.
• A tape recorded on this
• If you don't want to record the recording speed,
VCR cannot be played
counter, title, time, date etc, press the DISPLAY button,
back on another make of
then start recording.
time lapse VCR.
4 Press the REC button.
• If you press on the REC
button and the loaded
• The "REC" indicator is displayed on the display panel
cassette has no erasure-
and recording starts.
prevention tab, the VCR
will eject the cassette.
5 To stop recording, press the STOP button.
• During recording, the
Menu button will not
<Recording Speed>
function (the menu cannot
be accessed).
Recording
Speeds &
Duration
T-120
• If you playback the
2(SP)
recorded part where
recording check was
6(EP)
performed, noise may
18(EP)
appear.
30(EP)
• If you change the
recording speed during
48(SP)
recording, noise or
missing signal may result. 72(SP)
96(SP)
120(SP)
168(SP)
240(SP)
360(SP)
480(SP)
720(SP)
960(SP) 1280
14
(or ) button to set
Recording Rec. Audio
Recording
Duration Fields Record-
Intervals
T-160 / Sec. ing
2.67 1/60 Sec 60
8 1/60 Sec 60 YES
24 3/60 Sec 20
40 5/60 Sec 12
64 24/60 Sec 2.5
96 0.6 1.67
128 0.8 1.25
160 1.0 1
224 1.4 0.71 NO
320 2.0 0.5
480 3.0 0.33
640 4.0 0.25
960 6.0 0.17
8.0 0.125
(SP) means to be recorded by SP heads.
(EP) means to be recorded by EP heads.
Time Lapse Video Cassette Recorder
• During pause, the image
appears on screen but it is
not recorded.
• If a recording pause
continues for 5 minutes or
more, the VCR will go into
stop mode to avoid
damage to the tape.
Tape Motion
Continuous
Intermittent
Time Lapse Video Cassette Recorder
Record Pause
Recording can be interrupted temporarily.
1 Press the PAUSE/STILL button during recording.
• The "REC" and " " indicators are displayed on the
display panel.
2 To resume recording, press the REC button, or press
the PAUSE/STILL button again.
15