Autorepeat Recording - Lorex SG7970 User Manual

4 Set the security lock on VCR No.1.
• When the end of the tape on VCR No.1 is reached, the
output at the SERIES OUT terminal will switch signal.
This will start recording on VCR No.2, the tape will stop
and be ejected on VCR No.1.
24
Time Lapse Video Cassette Recorder

Autorepeat Recording

Autorepeat Recording
The same tape can be recorded over many times. Please
note that if you activate this feature you will lose the
entire previous recording.
1 Press the MENU, SHIFT
sequence to display the REC MODE SET menu.
• If during autorepeat
recording there is an
alarm trigger, " " is
displayed on the display
2 Press the SHIFT
panel and alarm
(
recording will take place.
Autorepeat recording will
3 Press the SHIFT
continue after alarm
autorepeat recording mode.
recording has completed
its programmed duration.
NO . . . . . . Autorepeat recording doesn't take place.
YES . . . . . Autorepeat recording takes place.
4 Press the MENU button two times, the normal screen
is displayed.
• The setting procedure is now complete.
5 Press the REC button.
• Recording will start. When the tape's end is reached,
the VCR will rewind it to the beginning regardless of
the counter memory, and recording will resume.
Time Lapse Video Cassette Recorder
, SHIFT button in
button to make the arrow mark
) point to Repeat Rec Set.
button to set the desired
"R.REC" will light on the display panel.
25