Table of Contents
Advertisement
Alarm Recording
Alarm Settings for the DVR.
Alarm Recording
NOTE: The number of cameras, alarms and sensors displayed on submenus will change based
on the Model of DVR: 4, 8 or 16 Cameras are available.
1. CH1-CH4: Lists all available cameras for configuration. Press the
and press the SEL button to select the CH#. Use the
FPS and Quality settings:
• FPS: A set number of Frames Per Second (total) is divided between all available cameras
based on Resolution settings.
• QUALITY: Set the quality level for the recording - High, Mid or Low.
2. POST ALARM RECORDING: Set the duration that the alarm will continue once detected: 5, 30, 60, 90,
120, 150, 180, 210 or 240 seconds.
CH/
FPS/
QUALITY
CH1
8
HIGH
CH2
8
MID
CH3
8
LOW
LOW
CH4
7
PostAlarm Rec: 150 sec
Setup Alarm
Save & Exit
and
and SEL buttons to change the
Recording Set
Sensor 1:
None
Sensor 2:
None
Sensor 3:
NC
Sensor 4:
NO
Alarm Out:
Off
Save & Exit
Alarm 1:
1 2
Alarm 2:
3 4
5 6
Alarm 3:
7 8
Alarm 4:
Setup Sensor
Save & Exit
Sensor 1:
None
Sensor 2:
None
Sensor 3:
NC
Sensor 4:
NO
Alarm Out:
Off
Save & Exit
and
buttons to highlight,
25
Advertisement
Table of Contents
