Table of Contents
Advertisement
Network Set
IP Set
The options in the IP Set menu control the local network setup for the Unit. See page 45 for
additional network setup instructions.
• DHCP: Press the
and press the
Set this option to YES to allow the unit to get
Network information from the Router; set this
option to NO if information will be manually
assigned to the DVR unit.
• IP ADDRESS: Press the
highlight, and press the
setup. Use the Numbers on the front panel of
the DVR to set the IP address.
• GATEWAY: Press the
highlight, and press the
enter setup. Use the Numbers on the front panel
of the DVR to set the Gateway address.
• NETMASK: Press the
setup. Use the Numbers on the front panel of the DVR to set the Net Mask.
• DNS SERVER: Press the
setup. Use the Numbers on the front panel of the DVR to set the DNS Server address.
• DVR PORT: Press the
Use the Numbers on the front panel of the DVR to set the DVR Port to 2000.
• WEBSERVER PORT: Press the
enter setup. Use the Numbers on the front panel of the DVR to set the Webserver Port to 0080.
• SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
buttons to highlight, and press the SEL button to accept the changes.
36
and
buttons to highlight,
buttons to set to NO/YES.
and
buttons to
button to enter
SEL
and
buttons to
button to set to
SEL
and
buttons to highlight, and press the
and
buttons to highlight, and press the
and
buttons to highlight, and press the
and
buttons to highlight, and press the
DHCP:
NO
IP Address:
###.###.###.###
Gateway:
###.###.###.###
Netmask:
###.###.###.###
DNS Server:
###.###.###.###
DVR Port:
2000
Webserver Port:
0080
Save & Exit
button to set to enter
SEL
button to enter
SEL
button to enter setup.
SEL
SEL
button to
and
Advertisement
Table of Contents
