Table of Contents
Advertisement
Network Connectivity
The DVR unit can be controlled using your existing network and a PC. The DVR Unit can be con-
trolled from within your network, or can also be controlled remotely through the Internet.
1. Connect the DVR to the Router
Power the Observation unit on.
NOTE: It is recommended that the
DVR be connected to the router prior
to powering on the system.
The DVR can be automatically
assigned an IP address by the router
(and other network related settings),
or an IP address can be manually
assigned within the MENU -
NETWORK setup on Page #.
2. Enable PORT FORWARDING on
your
Router.
Refer
instructions on Page 37 for details.
3. Set up a web account at
DDNS.strategicvista.net. Refer to
Pages # for setup and configuration
instructions.
4. Access the DVR Software with
either a Local PC or Remote PC
using Microsoft Internet Explorer 5
(or higher). See Pages # for details.
NOTE: Microsoft IE is the ONLY
supported browser at this time.
to
the
INTERNET
http://
(Not Included)
Network Connectivity
DVR
ROUTER
(Not Included)
PC
45
Advertisement
Table of Contents
