Table of Contents
Advertisement
Recording Set
Recording Set
Global Parameters
Settings for General Parameters.
1. AUDIO # REC: Turns Audio recording ON/OFF. press the
press the
buttons to change to ON/OFF.
2. REPEAT RECORDING: Allows the DVR unit to repeat recording. To change the setting, press
the
and
buttons to highlight, and press the
3. WATERMARK EMBEDDING: Adds Watermarking to the recorded event. Press the
buttons to highlight, and press the
4. RECORDING RESOLUTION: Sets the Recording Resolution for events. To change the
Resolution, press the
either 720x240 or 360x240.
5. SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
to highlight, and press the SEL button to accept the changes.
Normal Recording
Controls the settings for Manual Recording.
NOTE: The number of cameras displayed on submenus will change
based on the Model of DVR: 4, 8 or 16 Cameras are available.
1. CH1 - CH4: Lists all available cameras for configuration. Press the
and press the
buttons to select the FPS or Quality for each CH. Use the and
to change the settings, and press SEL to accept the changes:
• FPS: A set number of Frames Per Second (total) is divided between all available cameras
based on Resolution settings.
• QUALITY: Set the quality level for the recording - High, Mid or Low
2. SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
to highlight, and press the SEL button to accept the changes.
24
Global Parameter
buttons to change to ON/OFF.
and
buttons to highlight, and press the
Normal Recording
Audio 1 Rec:
Audio 2 Rec:
Audio 3 Rec:
Audio 4 Rec:
Repeat Rec:
Watermark Emb
Rec Res
Save & Exit
and
buttons to highlight, and
buttons to change to ON/OFF.
buttons to change to
CH/
FPS/
CH1
8
CH2
8
CH3
8
CH4
6
Save & Exit
and
buttons to highlight,
OFF
OFF
OFF
OFF
ON
ON
720 x 240
and
and
buttons
QUALITY
MID
MID
MID
MID
buttons
and
buttons
Advertisement
Table of Contents
