Automatic Firmware Upgrades; Network Settings; Selecting Dhcp Or Static Ip Address (Tcp/Ip) - Lorex N4K2-86BB User Manual

17 Using the Main Menu
5. Click Start.

17.5.12 Automatic Firmware Upgrades

Firmware upgrades provide enhanced functionality. The system will automatically check for
firmware upgrades if it is connected to the Internet.
To configure automatic firmware upgrade:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click INFORMATION. Click the Update/Reset on the side panel, then click the Upgrade
tab on the top panel.
3. Ensure Automatically Check for Updates is checked. If it was previously unchecked, click
OK to save changes.
4. Click Check for Updates to check for a newer firmware version.
5. If a newer version is found, click Upgrade Now to upgrade the system.

17.6 Network Settings

Configure general system settings, recording schedule, motion settings, and more.

17.6.1 Selecting DHCP or Static IP Address (TCP/IP)

Configure IP address settings.
To configure IP address settings:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
#LX400113; r. 9.0/57192/57197; en-US 72