Camera Firmware Upgrade (Cvi Upgrade); Network; Selecting Dhcp Or Static Ip Address (Tcp/Ip) - Lorex D841 Series User Manual

14 Using the Main Menu

14.5.6 Camera Firmware Upgrade (CVI Upgrade)

Manually upgrade camera firmware. This is typically only necessary if directed to do so by Lorex
technical support.
Prerequisite:
• Connect a USB flash drive (not inlcuded) to the recorder with the .bin camera firmware file(s)
preloaded.
To manually upgrade camera firmware:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click CAMERA, then click the CVI UPGRADE tab.
3. Click Browse to search for the .bin firmware file on the USB flash drive.
4. Check cameras you would like to upgrade using the selected firmware file.
5. Click Start Upgrade.

14.6 Network

Configure network parameters for your system.

14.6.1 Selecting DHCP or Static IP Address (TCP/IP)

The TCP/IP menu allows you to configure IP address settings.
To configure basic networking settings:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click NETWORK, then click the TCP/IP tab.
#LX400111; r. 1.0/55872/56018; en-US 60