Table of Contents
Advertisement
System Set
PTZ Menu
Pan / Tilt / Zoom control (for Pelco D or Pelco P Model Cameras only)
1. PAN / TILT / ZOOM: Accesses the PTZ Control for a
camera. Press the
and
press the
button to access PTZ controls:
SEL
• LEFT/RIGHT - Pans the camera LEFT/RIGHT
• UP/DOWN - Tilts the camera UP/DOWN
• VOL UP/DOWN - Zooms the camera IN/OUT
• SEL/MENU - Stops viewing / Exits viewing
2. FOCUS: Accesses the Focus Control for a camera.
Press the
and
buttons to highlight, and press the
button to access FOCUS controls:
SEL
• LEFT/RIGHT - Pans the camera LEFT/RIGHT
• UP/DOWN - Tilts the camera UP/DOWN
3. SETUP: Setup of the PTZ Cameras. Press the
button to enter the SETUP menu:
• CHANNEL: Select the PTZ camera location (Channel 1-4,
1-8, or 1-16 depending on model)
• ID: Set the camera ID to YES/NO
• Protocol: Select the PTZ Protocol (PELCO-D or PELCO-P)
• Baud Rate: Select the Baud Rate for the Camera (2400,
4800 or 9600 BPS)
• SAVE & EXIT: Saves any changes, and exits to the previous
menu.
4. SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
to highlight, and press the SEL button to accept the changes.
34
PTZ (enter Password)
buttons to highlight, and
and
Pan/Tilt/Zoom
Focus
Setup
Save & Exit
buttons to highlight, and press the
Channel
1
ID
NO
Protocol
PELCO-D
Baud Rate
2400 BPS
Save & Exit
and
SEL
buttons
Advertisement
Table of Contents
