Network Set; Ddns Set - Lorex L404 Instruction Manual

Network Set

This submenu allows you to change the NETWORK options for the DVR unit. The options in the
DDNS Set menu control access to the DVR using the free DDNS server, and the options in the IP
Set section control local network settings for local access to the DVR.

DDNS Set

The options in the DDNS Set menu allow the DVR unit to be accessed remotely using the Free
DDNS Server and the internet. All information will need to be manually entered based on
information from the free DDNS Setup (see page 48 for details).Set the USE DYNAMIC IP option
to YES if you will be using the Free DNS Website service to connect to your DVR.
• DDNS: Press the
and press the button to set to NO/YES.
SEL
• DOMAIN NAME: Press the
highlight, and press the
enter setup. Use the Numbers and Letters on
the front panel of the DVR to set the Domain
Name.
• USER NAME: Press the
setup. Use the Numbers and Letters on the front panel of the DVR to set the Domain Name.
• PASSWORD: Press the
setup. Use the Numbers and Letters on the front panel of the DVR to set the Domain Name.
• DNS STATUS CHECK: Connects to the remote DNS Server to check the Status. Press the
and buttons to highlight, and press the
Checking DDNS NOW. Please wait... it may take a few minutes
A Status message will appear indicating a PASS or FAIL on the connection:
DDNS Status Check: PASS / FAIL
• SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
buttons to highlight, and press the SEL button to accept the changes.
Network Set
and buttons to highlight,
and buttons to
button to set to
SEL
and buttons to highlight, and press the
and buttons to highlight, and press the
SEL
DDNS Set
IP Set
DDNS:
Domain Name:
User Name:
Password:
DDNS Status Check
Save & Exit
button to set to enter
SEL
button to set to enter
SEL
button to test the connection:
Network Set
YES
########
########
########
and
35