Specifications - Jensen JBS-500 User Manual

Symptom
Noise or sound
distorted on FM
broadcast
CD player does not play
Audio disc skips
while playing
Intermittent sound from
the player
Sound is distorted
Unit gets warm after
extended play at
high volume
Power Requirement
AC Adaptor:
Remote control:
Frequency Range
Radio Band
Bluetooth:
USB Charging (Work in standby and USB mode only)
USB Output:
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Spectra Merchandising Intl, Inc. is under license.
Other trademarks and trade names are those of their respective owners.
Possible Problem
FM wire antenna is not fully extended.
Unit not in DISC function
mode.
Audio disc is installed
incorrectly.
It the disc is self-compiled, the media
used may not be compatible with the
player.
Disc is dirty or scratched.
Dirty or defective disc
Dirty pick-up lens
Player is subject to excessive
shock or vibration
Volume level is set too high.
Sound source is distorted.
This is normal.

SPECIFICATIONS

Input: AC 120V~ 60Hz
Output: DC 12V
2 x 1.5V "AAA" (UM-4) batteries
FM 87.5 - 108 MHz
Version 5.0
DC 5V 1.0A (1000mA)
Retune the FM broadcast station.
Fully extend or reposition the FM wire
antenna.
Select DISC mode.
Insert audio disc with label side
up.
Use better quality blank media and
retest.
Wipe disc with clean cloth or use
another disc.
Clean or replace the defective
disc.
Use a lens cleaning disc to clean
the lens.
Relocate the player away from
shock or vibration.
Decrease the volume.
Try a different sound source. If
you are using an external
sound source like older
generation of iPod, try reducing
the output volume on the
device itself. Also try turning
XBASS OFF or change the EQ
setting.
Turn the unit off a period of
time or lower volume.
2A
E-21
Solution