Related Manuals for Jensen CD-60
Summary of Contents for Jensen CD-60
- Page 1 PERSONAL COMPACT DISC PLAYER MODEL: CD-60 USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
-
Page 2: Safety Precautions
WARNING Note: This product complies with DHHS rule 21 CFR, subchapter J, Part 1040 at the date of manufacture. SAFETY PRECAUTIONS As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. Stop operation immediately if any liquid or solid object should fall into the cabinet. -
Page 3: Protect Your Furniture
on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Page 7 BATTERY NOTE AND CARE Danger of explosion if the battery is replaced incorrectly. Replace only with the same or equivalent type Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. If the unit is not to be used for an extended period of time, remove the batteries.
- Page 8 Turning Unit Power On and Off in CD Mode Slide the CD/FM Mode selector to the CD position. To Turn ON the unit, press the PLAY/PAUSE button, LCD display will be on and then read the inserted disc after display “60 SEC” anti-skip message. If no disc is inserted or the inserted disc has an error, the display will show “disc”.
-
Page 9: Cd Play Mode
Battery Low Indicator (CD Mode only) The Battery Low Indicator will appear in the display when the batteries • need to be changed. CD PLAY MODE NORMAL PLAYBACK The whole disc is played and the player will stop after the last track is finished. SKIP AND SEARCH MODE During Play or Pause mode, tap the SKIP Forward "... -
Page 10: Cd Programmed Play
CD PROGRAMMED PLAY In CD stop mode, press the PROG button once, PROG number appears. PROG icon and Track number “00” start flashing in the display. Press SEARCH/SKIP button to select the desired track. When the desired track is displayed, press the PROG button to register. -
Page 11: Care And Maintenance
on the band. You need to manually tune in the station you were listening to again the next time you turn the FM radio on. HINTS FOR BEST RECEPTION: The cord for the earbuds also acts as the antenna for the FM radio. For best FM reception, unwrap and fully extend the earbud wires to improve the FM reception. -
Page 12: Specifications
No sound from earbuds Earbuds plug is not firmly inserted into the Phones socket. Intermittent sound Dirty or defective disc Dirty pick up lens Player is subject to excessive vibration or shock Low battery power Poor headphone connection Noise or the sound is Full extend the earbud wires for best reception. - Page 13 It has not been subjected to accident, misuse, abuse, improper service, usage outside the descriptions and warnings covered within the user manual or non- SPECTRA approved modifications. Claims are made within the warranty period. 2. This warranty does not cover damage or equipment failure caused by electrical wiring not in compliance with electrical codes or SPECTRA user manual specifications, or failure to provide reasonable care and necessary maintenance as outlined in the user manual.