Auxiliary Input Operation - Jensen JBS-500 User Manual

Bluetooth cd music system with digital fm stereo receiver and remote control

Hide thumbs

Table Of Contents

Table of Contents

After selecting your favorite song, press

start playing and adjust the volume level from paired device.

Rotate the VOLUME knob on main unit or VOLUME

to adjust the desired volume level.



Press

If you want to pair the JBS-500 with another Bluetooth enabled device, press and

hold the PAIR Button on remote control or

seconds or turn off Bluetooth function of device currently paired with JBS-500 then

repeat step 3 above.

Notes:

1.) Refer to the manual of your cell phone, tablet PC, computer or other Bluetooth

enabled devices for Bluetooth operation since it may vary from model to model.

2.) If your Bluetooth enable device does not support A2DP profile, it will not play the

music through the speaker, even if paired (linked).

3.) If you are pairing (linking) your computer to the unit using Bluetooth, you may

need to set the speaker as your computer's default sound device.

This unit features an auxiliary audio signal input jack for connection external audio devices

like MP3 players, Digital Audio Device and listen to them through the speakers of this unit.

1. Use an audio cable (not included) with one 3.5mm stereo plug on each end of the cable.

2. Plug one end into the AUX-IN jack on the main unit and the other end of the cable into

the Lineout jack or headphone jack of your external audio device.

3. Turn on the unit and external audio device.

4. Tap the MODE Button on main unit or remote control to select AUX-IN mode.

5. The volume level can now be controlled through the main unit. Operate all other

functions on the auxiliary device as usual.

Note:

•

If you connect this unit to the Line-Out jack of your external device, then you only

need to adjust the volume control of this unit.

If you connect the headphone jack of your external device, then you may need to

adjust both the volume controls of your external device and this unit to obtain the

desirable volume setting.

•

Press the

unit when you have finished listening. Don't forget to switch off the power of your

external device as well.

PRESET EQ / XBASS (REMOTE CONTROL ONLY)

This unit provides 4 different EQ modes to enhance your listening experience.

You can select the desired effect by pressing the EQ button on remote control repeatedly

at following sequence:

Press XBASS Button on remote control to activate BASS effects if necessary.

•

X-BASS icon

•

Press again to deactivate the BASS effects until the X-BASS icon disappeared.

Button on main unit or remote control to skip to previous or next song.

