Jensen JBS-500 User Manual page 15

.\\!/:.
4. Press the
in display. After few seconds, the total number of tracks and total time of the CD will
be shown on the LCD display.
IMPORTANT: Only use the
push on the CD tray to close it after loading a CD. This could damage the internal
mechanism used for opening and closing the CD tray.
Press the PLAY/PAUSE
5.
playing from first track.
6. Rotate the VOLUME knob on main unit or VOLUME
to adjust the desired volume level.
7. To pause playback, press the PLAY/PAUSE
control. The track time will be pause and track timing will keep flashing. To resume
playing, press the CD PLAY/PAUSE
You can choose to play your favorite track directly by pressing either the SKIP NEXT
8.
or SKIP PREVIOUS

number selected.
9.
To locate a particular section within a track, press and hold the
until the section is found. Release the button to continue playing your selection.
To stop playing, press the STOP
10.
11. Turn off the JBS-500 when you finish listening.
SKIP AND SEARCH MODE
For CD:
During Play or Pause mode, tap the SKIP NEXT
1.
to go to the next track or go back to the beginning of the current track.
2. During playback, press and hold the
track with audible high-speed playback.
For MP3-CD:
1. Tap PRESET+ Button on main unit repeatedly or FOLDER
control to select MP3 songs store in different folders.
2. Tap the SKIP NEXT
back to the beginning of the current track.
DIFFERENT PLAY MODES (CD/ MP3-CD/ USB)
Press the REPEAT Button on main unit or
select different of play modes when CD/USB is playing.
When playing CD, the play modes are shown as below.
Repeat 1
Button to close the CD tray. Unit starts to read the disc, "READ" shows
.\\!/:.
Button for opening and closing the CD tray. Do not
►
II
Button on main unit or remote control, the CD will start
Button. The LCD display will indicate the correct track

or SKIP PREVIOUS

Repeat All
►
II
Button on main unit or remote
►
II
Button again.
Button.
■

Button to search within the current
 
or
Button to go to the next track or go

0
Button on remote control repeatedly to
Random
E-14
Button on remote control
/
 
or
or SKIP PREVIOUS
Button on remote
/
Normal
Button
Button
